Monday, February 9, 2015

Just a note of concern

Why cant there be a shaded overlap on the top section?
I have thought about this before but the program will not let me do it, 
Because the chart is in 12 sections the program sees them as 12 separate designs and there is not an overlap allowed for the top and bottom(its not seeing a need for any overlap). 
This is why I have made sure that the design is printed with the same size for all charts so they can be easily put together. 
If you make a running grid on the left side of the design (Which will be the edge of the design) then you can follow that and count in with every chart and you will be right on the count.
Thank you and I hope this helps
donna

4 comments:

  1. Thanks for addressing this. I had to be careful with the sun's rays. I used the numbers on the charts to line up the 2nd chart.

    ReplyDelete
  2. I'm starting part 1 this evening -finally got the fabric! - so will keep an eye out for this when I get to part 2 :) Thanks Donna

    ReplyDelete
  3. I'm just getting to the Suns Rays and it's not matching up :/ I'll recount tomorrow and frig if needed

    ReplyDelete
  4. YAY me!! I was off by one. Phew! I REALLY shouldn't stitch and watch Downton, I've mucked up a couple times in the past listening to the Crawleys life issues lol

    ReplyDelete